Welcome to I-tec! Free sharing Latest effective Cisco Specialist 500-005 exam Dumps.
We make 500-005 PDF online sharing and 500-005 Youtube Videos help you learn to improve your skills easily. If you want to try the first time through Cisco Specialist 500-005:https://www.pass4itsure.com/500-005.html (q&as:50 PDF + VCE).
[PDF] Free Cisco Specialist 500-005 pdf dumps download from Google Drive: https://drive.google.com/open?id=1wavbEfOClRhsaaWMxPxCDHWXf39OwmOA
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/drive/folders/1dq6fv9FX6zSDDoHc3ge-WzVU9SNaUbsH
500-005 CCIE Wireless – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/ccie-wireless2.html
Latest effective Cisco Specialist 500-005 Exam Practice Tests
QUESTION 1
Which TX9000 display choice is best for reducing possible issues with viewing angles for conference
participants?
A. LCD
B. plasma
C. LED
D. CRT
E. HDTV
Correct Answer: B
QUESTION 2
Which two factors are crucial to the immersive Cisco TelePresence experience? (Choose two.)
A. aesthetics
B. acoustics
C. room shape
D. number of windows
E. number of active participants
F. ceiling height
Correct Answer: AB
QUESTION 3
The control cable for the 42-inch Auto Collaboration display connects to which component?
A. PS1 codec
B. presentation codec
C. LCU
D. AV expansion box
Correct Answer: C
QUESTION 4
Which of these determines the specific role for each codec?
A. the firmware
B. wiring position
C. software revision
D. Cisco Unified Communications Manager configuration
Correct Answer: B
QUESTION 5
Using the following table, correctly identify the location of each component.
Where is each component located?
Question Set 2
QUESTION 1
When using the TX9000 AV expansion box, how many total video output signals can be obtained using a
single video input?
A. one
B. two
C. three
D. four
E. five
F. six
Correct Answer: D
QUESTION 2
Which device is connected to the TX9000 AV expansion box for video input?
A. presentation (TS4) codec
B. collaboration/presentation display
C. center (TS1) codec
D. built-in video splitter
E. left (TS2) and right (TS3) codec
Correct Answer: A
QUESTION 3
Which three components does the LCU control? (Choose three.)
A. the lighting fixture power
B. the primary codec AV input controls
C. the projector
D. the room HVAC controls
E. the LCD settings
F. the PTZ camera controls
G. the yaw of the camera cluster
Correct Answer: ACE
QUESTION 4
From where does the LCU receive its instructions?
A. Cisco TelePresence Touch 12 screen
B. center (TS1) codec
C. left (TS2) codec
D. right (TS3) codec
E. presentation (TS4) codec
Correct Answer: B
QUESTION 5
The configured speed-dial numbers are located in which section of the Cisco TelePresence Touch 12?
A. Favorites section
B. Speed Dialing section
C. Meeting sectionD. Settings section
Correct Answer: A
QUESTION 6
Which hard button on the Cisco TelePresence Touch 12 console is used to end an active call?
A. Home button
B. Answer Call button
C. Manage Call button
D. End Call button
Correct Answer: B
QUESTION 7
Which two options describe the functions of the TX9000 codec? (Choose two.)
A. registers with Cisco Unified Communications Manager
B. registers with Cisco TelePresence Video Communication Server
C. allows a presenter to share a presentation from their laptop
D. converts still JPEG files to motion video
E. provides a bridge to third-party conference systems
F. captures and streams video for surveillance purposes
Correct Answer: AC
QUESTION 8
Which statement about the TX9000 codec is true?
A. The TX9000 allows for SIP and H.323 signaling.
B. It uses the Cisco SIP standard.
C. It uses HTTPS for configuration.
D. It uses HTTP for configuration.
E. It uses a cluster of six TX9000 codecs for redundancy.
Correct Answer: D
Question Set 3
QUESTION 1
When a new TX9000 system is being installed, where does the TX9000 obtain its system image?
A. Cisco TelePresence Video Communication Server
B. Cisco Unified Communications Manager
C. Cisco TelePresence Management Server
D. Domain Name Server
E. FTP
Correct Answer: B
QUESTION 2
The TX9000 should be configured in Cisco Unified Communications Manager as which type of endpoint?
A. H.323
B. SIP
C. SCCP
D. ISDN
Correct Answer: B
QUESTION 3
When configuring the Device Information section of a new TX9000 in Cisco Unified Communications
Manager, which two selections are required to be checked? (Choose two.)
A. Use Device Pool Calling Party Transformation CSS
B. Retry Video Call as Audio
C. Ignore Presentation Indicators (internal calls only)
D. Allow Control of Device from CTI
E. Logged Into Hunt Group
F. Remote Device
Correct Answer: BD
QUESTION 4
Which three items must be configured for the TX9000 to automatically obtain the TFTP server? (Choose
three.)
A. Option 443 ip <ip_address> must be defined in the DHCP server.
B. Choose Automatic in the Use Configuration TFTP Servers entry.
C. Choose Specify in the Use Configuration TFTP Servers entry.
D. Option 150 ip <ip_address> must be defined in the DHCP server.
E. Choose Configuration > IP Settings. Change the DHCP setting to No.
F. Choose Configuration > IP Settings. Change the DHCP setting to Yes.
Correct Answer: BDF
QUESTION 5
Which option allows the TX9000 to receive its configuration and software image from a TFTP server when
a DHCP server is not available?
A. Use the Cisco TelePresence Touch 12 to configure the TX9000 for TFTP server access.
B. Log into the Cisco TelePresence Administration GUI, choose Unified CM Settings, choose Specify in
the Use Configuration TFTP Servers entry, enter the IP address or addresses for Cisco Unified
Communications Manager in the TFTP Server field(s), and click Apply.C. Log into Cisco Unified Communications Manager and configure the TX9000 from the device
configuration web page.
D. Log into the local router and configure TFTP server access.
Correct Answer: B
QUESTION 6
Which TX9000 codec will receive image files from the TFTP server?
A. Cisco TelePresence Touch 12
B. right (TS3) codec
C. left (TS2) codec
D. center (TS1) codec
E. presentation (TS4) codec
Correct Answer: D
QUESTION 7
If no speed-dial numbers are displayed on the Cisco TelePresence Touch 12 Favorites screen, which of
these is the cause?
A. Numbers need to be added using the Cisco TelePresence Touch 12.
B. Numbers are not configured in the Exchange Address Book.
C. Numbers need to be manually added to the Address Book using the Cisco TelePresence
Administration GUI.
D. Numbers are not configured in Cisco Unified Communications Manager.
Correct Answer: D
QUESTION 8
Refer to the exhibit.
Under which configuration components is the TFTP server specified?
A. IP Settings
B. Network Settings
C. Unified CM Settings
D. Telephony Settings
E. System Settings
F. Configuration Issues
Correct Answer: C
QUESTION 9
Refer to the exhibit.
Under which component is the TX9000 configuration restored to factory configuration?
A. IP Settings
B. Network Settings
C. Unified CM Settings
D. Telephony Settings
E. System Settings
F. Configuration Issues
Correct Answer: F
Thank you for reading, if you just to improve the skills to gain experience please keep an eye on us!
If you want to easily pass the Cisco Specialist 500-005 exam: https://www.pass4itsure.com/500-005.html (q&as:50 PDF + VCE). Year-round updates! 100% guaranteed first attempt to pass.
[PDF] Free Cisco Specialist 500-005 pdf dumps download from Google Drive: https://drive.google.com/open?id=1wavbEfOClRhsaaWMxPxCDHWXf39OwmOA
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/drive/folders/1dq6fv9FX6zSDDoHc3ge-WzVU9SNaUbsH
Why Choose Pass4itsure?
related: https://www.adtest2.org/latest-cisco-642-998-dumps-dcucd-study-guide.html
