New Questions! Now more new added Cisco https://www.pass4itsure.com/642-587.html exam questions and answers are available at Flydumps In Flydumps new Cisco 642-587 vce or pdf braindump file, you can get all Cisco 642-587 new questions and answers.We guarantee the 100% pass rate.
QUESTION 101
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticate the client when one-time passwords are in use?
A. MS-CHAP v2
B. PAP
C. GTC
D. MD5
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 102
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones, which two general control settings should you select? (Choose two.)
A. Aggressive Load Balancing on
B. Aggressive Load Balancing off
C. Multicast on
D. Multicast off
E. AP Fallback on
F. AP Fallback off
Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 103
You are charges with implementing a secure wireless installation which will provide Internet access to client devices but will not allow communications between wireless clients. In addition to implementing PSPF or peer-to-peer blocking on the wireless side, which of the following actions should you perform on the wired infrastructure?
A. Take no action, you have achieved your goal.
B. Implement a Cisco Secure IPS sensor.
C. Implement a protected port on the access switches.
D. Implement 802.1X on the switch ports.
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 104
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phone to drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind of issue it is, you decide to increase the bandwidth reserve for roaming on the WLAN controller to maximum. What level do you set the bandwidth to?
A. 5 percent
B. 15 percent
C. 25 percent
D. 35 percent
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 105
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. In order to accomplish this, which two IETF RADIUS attributes should you configure on the Cisco Secure ACS? (Choose two.)
A. 064 Tunnel-Type
B. 066 Tunnel-Client-Endpoint
C. 067 Tunnel-Server-Endpoint
D. 081 Tunnel-Private-Group-ID
E. 082 Tunnel-Assignment-ID
F. 083 Tunnel-Preference
Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
QUESTION 106
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2. H-REAP AP2 has six other clients associated to it, which continue to pass traffic. What has caused this problem?
A. H-REAP AP1 lost its connection to the controller.
B. H-REAP AP2 lost its connection to the controller.
C. H-REAP AP1 has reached its client limit.
D. H-REAP AP2 has reached its client limit
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 107
You are configuring a wireless LAN controller for QoS. Which 802.11e user priority tag should you apply to voice applications?
A. 1
B. 3
C. 4
D. 6
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 108
You are using ADU and are authenticated and associated to an access point. However, you are unable to obtain an IP address. Which of these has caused this problem?
A. invalid SSID
B. invalid 802.1X authentication type
C. invalid encryption type
D. invalid WEP key
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 109
Which parameter, when enabled on a standalone access point, gives the highest priority to a voice packet even when QoS is not enabled?
A. QoS Element for Wireless Phones
B. IGMP Snooping
C. WMM
D. AVVID Priority Mapping
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 110
You review the Failed Attempts logs on an AAA server and find: “unknown network access server error.” Which failure could produce this error?
A. failure of the wireless client and AAA server handshake
B. supplicant authentication failure
C. AAA client and AAA server handshake
D. Wrong password used by the supplicant
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 111
If it is properly deployed, a controller-based access point is capable of monitoring all VLANs on a network when you select which of the following modes from the AP Mode drop-down menu on the controller?
A. Monitor
B. Rogue Detector
C. Sniffer
D. Mirror
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 112
On a WLAN controller, what is the default limit on the number of entries in the database that will be used for local authentication?
A. 50
B. 128
C. 512
D. 1024
Correct Answer: C Section: (none) Explanation
Explanation/Reference: QUESTION 113
Which Cisco Aironet Series has a built-in digital thermometer designed to protect the radio?
A. Cisco Aironet 1500 Series
B. Cisco Aironet 1400 Series
C. Cisco Aironet 1300 Series
D. Cisco Aironet 1200 Series
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 114
A Cisco 4404 WLAN controller is being connected to a Cisco 6500 Catalyst Series Switch. How would you interconnect and configure LAG for connectivity and ensure redundancy?
A. All four ports from the Cisco WLC terminated to the same Catalyst gigabit module and channel group.
B. All four ports from the Cisco WLC terminated to the same Catalyst gigabit module using two channel groups.
C. Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 20 and Cisco WLC ports 3 and 4 to Catalyst gigabit module slot 2 channel group 40.
D. Ports 1 and 2 from Cisco WLC to Catalyst gigabit module slot 1 channel group 10 and Cisco WLC ports 3 and 4 to Catalyst gigabit module slot 2 channel group 10.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 115
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast?
A. router(config-ssid)# enable
B. router(config-ssid)# advertise
C. router(config-ssid)# broadcast
D. router(config-ssid)# guest-mode
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 116
You have been called upon to add location-based services into an existing controller-based wireless design which primarily encompasses handheld devices such as barcode scanners and Cisco 7920 wireless IP phones. In which mode should you deploy the additional access points to achieve the density required without excessive co-channel interference?
A. sniffer mode
B. monitor mode
C. location mode
D. tracking mode
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 117
What is the maximum number of WLAN controllers that can join a single mobility group?
A. 12
B. 24
C. 36
D. 48
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
The Cisco contains more than 400 practice questions for the Cisco https://www.pass4itsure.com/642-587.html exams,including simulation-based questions.Also contains hands-on exercises and a customized copy of the Cisco 642-587 exams network simulation software.
