The Cisco 642-354 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of Cisco 642-354.We provide our customers with the excellent 7×24 hours customer service. We have the most professional Cisco 642-354 expert team to back up our grate quality products. If you still cannot make your decision on purchasing our product, please try our Cisco https://www.pass4itsure.com/642-354.html free pdf
Exam A
QUESTION 1
Issuing the show role command to check a defined role in an MDS 9000 Series switch will produce the following output:
Role : Manage VSAN Description : vsan policy : deny Permitted vsans : 2-4
Rule Type Command-type Feature
1.
permit config *
2.
deny config fspf
3.
permit debug zone
4.
permit exec fcping
Which of the following two functions can a user with role Manage undertake? (Choose two.)
A. change fspf parameters
B. configure FC port parameters for VSAN 3
C. issue a debug command for a port
D. configure zoning for all VSANs
E. check connectivity for VSAN 2
Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 2
What two commands must be executed on an MDS 9000 family switch in order to change a dynamically assigned Domain ID 5 to a static Domain ID 10 for VSAN 10? Choose two.
A. switch(config-if)# shut fcdomain 5
B. switch(config-if)# no shut fcdomain 10
C. switch(config)# fcdomain domain 10
D. switch(config)# fcdomain domain 10 static vsan 10
E. switch(config)# fcdomain restart vsan 10
F. switch(config)# fcdomain restart disruptive vsan 10
Correct Answer: DF Section: (none) Explanation
Explanation/Reference:
QUESTION 3
Which command is used to display the list of hosts configured for Fabric Analyzer remote capture?
A. show fcanalyzer
B. clear fcanalzyer
C. show remote fcanalyzer
D. show fcanalyzer remote list
Correct Answer: A Section: (none) Explanation
Explanation/Reference: QUESTION 4
Refer to the exhibit. Each link shown is a 16-port PortChannel. What are the problems with the design?
A. unpredictable hop count
B. inherent oversubscription of ISLs
C. low percentage of usable ports
D. requires director-class switches for reliability
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 5
Reference the exhibit.
Given the output from the show command in the exhibit, what does the error message indicate is wrong
with the configuration?
A. Trunk mode has been administratively set to E instead of TE.
B. The port needs a shut/noshut to become active.
C. The port has been incorrectly left in VSAN 1.
D. The trunk needs configured VSANs allowed on both sides.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 6
Which three of these statements are attributes of the Cisco SET? (Choose three.)
A. SET configuration is persistent.
B. SBCCS and SCSI commands are supported.
C. SET initiators can only communicate with SET targets.
D. SET requires SAN-OS 2.0 or higher and the SAN Extension IP license.
E. Only SCSI read/write commands are supported.
Correct Answer: CDE Section: (none) Explanation
Explanation/Reference:
QUESTION 7
Consider the ACL applied to a GigE 2/3 on a Cisco MDS switch. What happens to traffic that does not match any of the rules?
A. The traffic is allowed to pass through the interface because there is an implicit permit applied.
B. The traffic is not allowed to pass through the interface because there is an implicit deny applied.
C. The ACL is invalid and will not be accepted, and as a result the traffic will be allowed to pass.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 8
The Call Home feature provides what type of notification when critical events occur?
A. SNMP
B. syslog
C. PBX
D. e-mail
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 9
Your company has a multiswitch fabric including Switch A and Switch B. An administrator of Switch A creates the following zoneset and successfully activates it:
zoneset name ZoneSet1 vsan 1 zone name Zone1 vsan 1 pwwn 21:01:00:e0:8b:3c:03:b6 pwwn 21:01:00:e0:8b:3c:55:bb
Later in the day a second administrator creates the following zone set on Switch B:
zoneset name ZoneSet2 vsan 1 zone name Zone1 vsan 1 pwwn 21:01:00:e0:8b:3c:03:b6 pwwn 21:01:00:e0:8b:3c:55:aa
What happens when the administrator of Switch B attempts to activate ZoneSet2?
A. ZoneSet2 becomes the active zoneset for both Switches A and B.
B. The fabric segments and ZoneSet2 become the active zoneset for Switch B only.
C. The fabric segments and ZoneSet 2 become the active zoneset for Switch A only.
D. The fabric segments and ZoneSet 1 remain the active zone set for Switch B, while ZoneSet 2 becomes the active zoneset for Switch A.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 10
The Cisco Traffic Analyzer is required to gather historical data for what type of information?
A. Class F traffic
B. SCSI session data
C. Class 2 errors
D. FC framing errors
Correct Answer: B Section: (none) Explanation
Explanation/Reference: QUESTION 11
An administrator finds these lines in the running configuration file:
interface vsan1 ip address 10.10.10.3 255.255.255.0 no shut
What is the impact of this entry?
A. The entry sets the IP address on the management port and places it in VSAN 1.
B. The entry creates an interface for IPFC.
C. The entry sets up a common IP address to be shared by all GigE ports in VSAN 1.
D. The entry sets up a default gateway for VSAN 1.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 12
Which three of these upper-level protocols are supported by FC-4? (Choose three.)
A. HIPPI
B. SBCCS
C. OSPF
D. SCSI
E. PPTP
F. CDP
Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 13
Which two of these items are advantages of configuring static domain IDs? (Choose two.)
A. facilitates troubleshooting
B. reduces FSPF link-state updates
C. increases switch throughput
D. ensures that persistent FCIDs will not change
E. enables LUN masking
Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
QUESTION 14
You have been asked to install a Cisco MDS switch for your company. If you accept all installation defaults, which of these will occur?
A. default port state: shut default zone policy: deny
B. default port state: no shut default zone policy: deny
C. default port state: shut default zone policy: permit
D. default port state: no shut default zone policy: permit
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 15
What are four valid protocols for copying software to the MDS 9000 family switches? (Choose four.)
A. Remote Copy Service
B. Secure Copy Protocol
C. Trivial File Transfer Protocol
D. File Transfer Protocol
E. Secure Trivial File Transfer Protocol
F. Secure File Transfer Protocol
Correct Answer: BCDF Section: (none) Explanation
Explanation/Reference:
QUESTION 16
Which three CLI commands can be used to view remaining buffer-to-buffer credits? (Choose three.)
A. show interface fc x/y
B. show interface fc x/y brief
C. show interface fc x/y counters
D. show interface fc x/y bbcredit
E. show interface fc x/y flow-control
Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
QUESTION 17
You are looking at the LEDs on an MDS 9500 Supervisor module. If the Status LED is orange, which statement is true?
A. The module cannot boot because of a corrupted image on the flash.
B. The diagnostic test failed. The module is not operational because a fault occurred.
C. The module is booting or running diagnostics.
D. Incompatible power supplies are installed.
Correct Answer: C Section: (none) Explanation
Explanation/Reference: QUESTION 18
When installing the Port Analyzer Adapter, how do you connect the Fibre Channel port to the MDS switch?
A. single-mode fiber and SC to LC connector
B. multimode fiber and LC to LC connector
C. single-mode fiber and LC to LC connector
D. multimode fiber and SC to LC connector
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 19
Your company is planning a SAN deployment using Fibre Channel connections from a central, highly secure data center to several less secure branch offices. Which of these security features would allow you to disable all branch office switch management ports and yet still maintain the complete suite of TCP/IP-based SAN management utilities?
A. IPSec
B. Port Mode Security
C. Port Security
D. Overlay VSAN
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 20
An administrator reviews the running configuration of a switch that a junior administrator has prepared to be placed in a heterogeneous SAN environment. This environment includes three different brands of Fibre Channel switches. In this particular environment, only VSAN 1 is being used.
Which of these attributes suggests that the switch has not been properly configured?
A. A static domain ID has been set to 0x21.
B. src-dst-ox load balancing has been selected.
C. Interop mode 3 has been selected.
D. FCC has been enabled.
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 21
Which of these modules performs hardware compression using Mode 1?
A. MPS-14/2 module
B. IPS-4
C. SSM
D. IPS-8
E. Supervisor Module
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 22
When using interop mode on an MDS 9000 switch, what is the Domain ID range?
A. 1 to 97
B. 127 to 239
C. 97 to 239
D. 97 to 127
E. 1 to 127
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 23
Refer to the exhibit. When a VSAN is deleted where do its port members get transferred?
A. vsan 1
B. vsan 100
C. vsan 4094
D. vsan 2
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 24
Which two of these procedures should you perform to troubleshoot connectivity between a Microsoft Windows host and its SAN-attached storage? (Choose two.)
A. Check the Windows Disk Manager to verify that storage is visible.
B. Convert all file systems to NTFS format.
C. Check the Cisco Device Manager to verify that the HBA link is up.
D. Ensure that the HBA supports both 1- and 2-gigabit speeds.
Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 25
What command would a storage administrator use to determine the number of frames that exit the FC2/6 port?
A. show fc 2/6
B. fctrace
C. debug fibrechannel port 2/6
D. show interface counters brief
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 26
Match the troubleshooting SAN-OS command with its corresponding output,You may not use all options.
A.
B.
C.
D.
Correct Answer: Section: (none) Explanation
Explanation/Reference:
Answer: Check certifyme eEngine, Download from Member Center
QUESTION 27
Your storage administrator notices that the power LEDs on the Cisco MDS 9509 supervisors are displaying an orange color. What does this color indicate?
A. The switch has insufficient power and will shut down.
B. The switch has insufficient power for all modules.
C. A sensor in the power supply has discovered a fault that may lead to a power supply failure in the near future.
D. There is insufficient power to operate both supervisor modules.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 28
A customer wants to disable CHAP authentication for a specific interface. Which command or commands should be issued?
A. switch(config)# interface gig 2/1 switch(config-if)# iscsi authentication none
B. switch(config)# interface fc2/1 switch(config-if)# iscsi authentication none
C. switch(config)# interface iscsi 2/1 switch(config-if)# iscsi authentication none
D. switch(config)# interface mgmt0 switch(config-if)# iscsi authentication none
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 29
Which services are supported by a Cisco SAN-OS AAA configuration?
A. Telnet, SSH, FM and DM logins
B. console login, FC-SP authentication, FTP
C. FC-SP authentication, FM and DM logins, TFTP
D. iSCSI authentication, FTP, FC-SP authentication
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 30
Inter-VSAN Routing is interoperable with other vendor switches as long as MDS switches are set to inter-op 1 mode. Where in the fabric can the other vendor switches reside for a successful implementation of Inter-VSAN Routing?
A. core switches
B. edge switches
C. distribution switches
D. remote site switches
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 31
Which license is required on switches that are going to implement LUN zoning?
A. Storage Services Enabler
B. Enterprise license
C. Fabric Manager Server license
D. SAN Extension over IP license
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 32
Which tool is used to diagnose protocol errors, credit starvation, and malformed or nonstandard compliant frames or primitives on a Fibre Channel network?
A. Port Analyzer Adapter
B. Fabric Analyzer
C. external Fibre Channel Protocol Analyzer
D. Fabric Manager
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 33
Which two of these environments suggest the use of FCIP Write Acceleration? (Choose two.)
A. remote tape backup
B. PortChannel links between sites
C. applications that support multiple outstanding I/Os
D. fast network with minimal delays
E. DWDM links
Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 34
Your Cisco MDS director has 224 Fibre Channel ports and two power supplies running with 110 VAC. Which of the following may occur if one power supply fails?
A. The switch shuts down immediately.
B. Insufficient power is available to operate all modules, so some will be shut down.
C. The standby supervisor shuts down.
D. The switch shuts down after a five-minute grace period.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 35
You have been asked to implement a security policy that will reduce the potential of unauthorized access to the fabric by WWN spoofing. Which security feature was designed to address this threat?
A. port security
B. port mode security
C. FCSP
D. DH-CHAP
E. port-based zoning
Correct Answer: A Section: (none) Explanation
Explanation/Reference: QUESTION 36
Which command will send system messages to a remote syslog server?
A. switch(config)# logging server 192.168.0.198 facility SANlog
B. switch(config)# logging 192.168.0.198 logfile SANlog
C. switch(config)# logging /var/log/logfile
D. switch# copy log:SANlog volatile:log.txt
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 37
A customer needs support for their mainframe application that uses SBCCS. Which of these protocols specifically addresses this need?
A. FICON
B. Fibre Channel
C. iSCSI
D. FCIP
E. IP
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 38
What protocol can be used in a multivendor environment to enable greater bandwidth between a Cisco MDS 9000 switch in interop mode and another vendor FC switch?
A. FSPF
B. port channel
C. FCC
D. RDL
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 39
A customer wants to set up a SPAN tunnel between switch A and switch B. Which three of the following configuration requirements are needed to establish a SPAN tunnel between switches A and B? (Choose three.)
A. Trunking must be enabled between switch A and switch B.
B. VSAN interfaces must be configured.
C. A minimum of two VSANs must be active on each switch.
D. IP routing must be enabled on each switch.
E. A PortChannel must be configured between switch A and switch B.
F. A minimum of two links must be configured between switch A and switch B.
Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 40
An administrator finds the following lines in the running configuration file: interface vsan1 ip address 10.10.10.3 255.255.255.0 no shut
A. the IP address on the management port, placing it in VSAN 1
B. a management VSAN on the switch
C. a common IP address to be shared by all GigE ports in VSAN 1
D. a default gateway for VSAN 1
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
Well-regarded for its level of detail, assessment features, and challenging review questions and hands-on exercises,642-354 helps you master the concepts and techniques that will enable you to succeed on the https://www.pass4itsure.com/642-354.html exam the first time.
